Serial Num. = ?
FCC ID = ?
CPU Type = Atheros AR2312
MIPS Rev = ?
CPU Speed = 180MHz
Bus = ?
Flash Type = ?
Flash Chip = ?
Flash Size = 4MB
Max Firmware Size = 3801088 bytes
RAM Size = 32MB
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-LAN Auto MDI/MDI-X support
Wired Standard = IEEE 802.3/3u/3af
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
MiniPCI slots = ?
PoE = compliance up to 100 meters of CAT 5 cable length
Power = 5V/2A
Color of LEDs = ?
Size = ?
USB = ?
Serial Port = Yes
JTAG Port = ?
Supported by TJTAG/Version = ?
Supported by dd-wrt as of = v.24 rc7 - build 9414
dd-wrt K2.4 Support = Yes
dd-wrt K2.6 Support = No
Special Features = outdoor enclosure
Radio ? How many radio's?
Wireless Radio = Atheros AR5112A (WiSoC)
WLAN DSP processor = ?
Antenna Connector Type = N-Type Female
Wireless Standard = IEEE 802.11a/b/g/h @ 20dBm
WiFi Operating Frequency = ETSI: 802.11a: 5.470 to 5.725 GHz
USA: 802.11a: 5.725 to 5.825 GHz
ETSI: 802.11b/g: 2.412 to 2.472 GHz
USA: 802.11b/g: 2.412 to 2.462 GHz
802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b = 1, 2, 5.5, 11Mbps
802.11a = 6, 9, 12, 18, 24, 36, 48, 54Mbps
Radio cor_rev = ?
Radio Capabilities = ?
In Windows XP, Click Start Button - All Programs - Accessories -
Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Bits per second = 115200
Data Bits = 8
Parity = none
Stop bits = 1
Flow control = none
Click File - Save As, and select a place to save it to so you
don't have to enter the settings again.
After installing putty, run it
Serial line = The COM port your using for serial (ie. COM3)
Speed = 115200
Click on Serial under Connection
Serial line to connect to = same as above (Serial line)
Speed (baud) = 115200
Data bits = 8
Stop bits = 1
Parity = None
Flow control = None
Enter a name for your connection under saved sessions