InfoDepot Wiki
Advertisement

our here: Home / Network / Hardware Specific / Asus / RT-N10U


Asus RT-N10U
Asus RT-N10U.jpg

Homepage

Asus RT-N10U,RTN10U_Black

Wikipedia

asus routers list,wikidevi,wikidevi

dd-wrt

RT-N10U

OpenWRT

rt-n10u

Tomato

shibby mod,advanced tomato

NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer with only lan cable and power.

Specs[]

Platform

Serial Num. = ?
FCC ID = MSQRTN10U
CPU Type = BCM5357
MIPS Rev = ?
CPU Speed = 300 MHz
Bus = ?
Flash Type = ?
Flash Chip = Winbond model: W25Q64BVSIG
Flash Size = 8MB
Max Firmware Size = 8MiB
RAM Size = 32MB
RAM Chip = ?
nvram Size = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-WAN 4-10/100-LAN
Wired Standard = IEEE 802.3, IEEE 802.3u
boot_wait = 5
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
MiniPCI slots = ?
PoE = ?
Power = 12V/1A
Color of LEDs = yellow
Size = 173 x 130 x 35 mm
USB = 1x
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = ?
WLAN DSP processor = ?
Antenna Connector Type = External 5 dBi antenna x 1
Wireless Standard = IEEE 802.11b/g/n
WiFi Operating Frequency = 2.4GHz
 802.11n = up to 150Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 802.11b = 1, 2, 5.5, 11Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Links of Interest[]

[http://www.foxnetwork.ru/index.php/en/component/content/article/36-reviews/92-asus-rt-n10u.html hardware and upgrade guide]


Flashing[]

Fixme.gif

Upgrading[]

Fixme.gif This section is in need of cleanup!

Reverting[]

Fixme.gif This section is in need of cleanup!

JTAG/Serial Info[]

JTAG[]

JTAG Pinouts[]
Fixme.gif This section is in need of cleanup!
JTAG Recovery[]
Fixme.gif This section is in need JTAG Recovery Instructions!

Serial[]

Serial Pinouts[]
Fixme.gif This section is in need of cleanup!
Hyper terminal Setup in Windows XP[]
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP[]
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = None
 Flow control = None
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open
Serial Recovery[]
Fixme.gif This section is in need of Serial Recovery Instructions!

USB Info[]

Fixme.gif This section is in need of cleanup!

vlan Info[]

Fixme.gif This section is in need of cleanup!

Pictures[]

Fixme.gif This section is in need of cleanup!


FCC Pictures[]

alt text alt text

alt text alt text alt text

alt text alt text alt text

alt text alt text alt text

alt text alt text alt text

alt text alt text alt text

alt text alt text

Notes[]

 

Hardware Modification[]

 
Advertisement