Your here: .../.../Hardware Specific/Rosewill/Rosewill RNX-EasyN1

Specs

FCC ID = U2M-UB9700803
Radio Chip = Ralink RT3070L PB25860E0 0830ST




Standards
    IEEE 802.11b/g/n
Wireless Data Rates
    Up to 150Mbps
Security
    WPA/WPA2 (AES, 64,128-WEP with shared-key authentication)
    WPS PIN, PBC (Hardware WiFi Protected Setup Button)
    QoS-WMM
WPA/WPA2
    WPA2
Interface
    USB 2.0
Frequency Band
    2.4GHz - 2.484GHz
Channels
    11 Channels (US, Canada) 13 Channels (Europe)
Modulation
    OFDM: BPSK, QPSK, 16-QAM, 64-QAM
    DBPSK, DQPSK, CCK
LEDs
    Link/Activity
Transmitted Power
    2.412~2.472G(IEEE802.11b)
    >= 16dBm @1~11Mbps
    2.412~2.472G(IEEE802.11g)
    >= 16 dBm @6Mbps
    >= 12 dBm @54Mbps
    2.412~2.472G(IEEE802.11N)
    >= 16dBm
Antenna
    Printed ANT
System Requirements
    Windows 2000, XP, Vista 32 and 64 bit/ MAC 10.3/ 10.4/ 10.5/ 10.6
Temperature
    0°C - 45°C (32°F - 113°F)
Humidity
    15% - 95%, Non-Condensing
Features
    Supports 802.11b/g/n 1T1R architecture with fully forward compatible with IEEE802.11n draft 4.0 and IEEE 802.11b/g standard.
    NOTICE: RNX-EasyN1 doesn't support Linux now.
    The easiest way to upgrade your system into wireless N network.
    Connect your PC/NB to a wireless network in minutes using high speed USB2.0 interface.
    802.11b/g/n 4.0 provide further coverage, less dead spot and higher throughput.
    Easy setup with Wi-Fi Protected Setup (WPS).
    Security support WPA/WPA2 (AES, 64,128-WEP with shared-key authentication).
    Wireless Multimedia Enhancements Quality of Service support (QoS) / enhanced power saving for Dynamic Networking
    RNX-EasyN1 is also fully compatible with IEEE 802.11b/g standard.
    Compatible with Windows 2000, XP, Vista 32 and 64 bit/ MAC 10.3/ 10.4/ 10.5/ 10.6
    Advanced power management for Low power consumption

Links of Interest

 This section is in need of cleanup!

Newegg Overview

Upgrade almost any computer to a wireless N network with this simple device.

The Rosewill RNX-EasyN1 adapter connects via USB to your computer, turning it into a wireless 802.11n compliant device. The adapter features a frequency band of 2.4GHz - 2.484GHz for less dead spots and less interference with other devices. For your convenience, security comes standard with a Wi-Fi Protected Setup as well as shared-key authentication. The adapter also features advanced power management for lower power consumption.